An air compressor can come in handy in a number of circumstances. Whether you need to fill a tire or add pressure to a nail gun, a functional compressor is often a lifesaver. To keep this piece of equipment working optimally, it is a good idea to know what problems to look out for. Consider these basic maintenance practices and keep your compressor performing its best.
Every so often, you need to replace the air filters on your unit. When a filter becomes clogged, it prevents the air from passing through the machine. This, in turn, causes the compressor to work harder to perform its task. The longer the equipment struggles, the sooner it is your compressor will break down. Change the filters every few months to avoid this commonplace issue.
Tiny holes in the hose may also cause the compressor to work at a reduced capacity. Unfortunately, it isn’t always easy to see rips in the materials lining the cord. Since a lot of wear and tear and be placed on this component, it isn’t a bad idea to look at purchasing an extra hydraulic hose San Antonio so you can test to see whether or not there’s an abrasion.
Issues with the hose are not the only problems that can result in low pressure. When the discharge or intake valves seem to be showing lower pressure than normal, it might be time to install a new valve plate. Often, replacing this part can help restore the pressure on your compressor to its usual place. If you notice air blowing out from the the inlet, it may also be an indication that you need to pay attention to the state of your current valve plate.
In order for you to get many years of use out of your air compressor, proper maintenance is a must. Take your time to understand what work you need to put in and see how it helps the performance of your equipment.